The XC2C384-10PQ208C is a high-performance Complex Programmable Logic Device (CPLD) from AMD Xilinx’s renowned CoolRunner-II family. This advanced CPLD combines exceptional processing speed with ultra-low power consumption, making it the ideal solution for portable electronics, data communications systems, and industrial control applications. With 384 macrocells, 9,000 gates, and 173 I/O pins in a compact 208-PQFP package, the XC2C384-10PQ208C delivers outstanding logic density for demanding embedded designs.
XC2C384-10PQ208C Key Features and Benefits
The XC2C384-10PQ208C stands out in the programmable logic device market due to its innovative CoolRunner-II architecture. This CPLD utilizes advanced 0.18μm CMOS technology to achieve near-zero standby power consumption while maintaining high-speed operation up to 217 MHz system frequency.
Ultra-Low Power Consumption
One of the most significant advantages of the XC2C384-10PQ208C is its exceptional power efficiency. Unlike traditional CPLDs that use sense amplifiers with constant residual current draw, this device employs pure CMOS design methodology, resulting in:
- Near-zero standby power consumption
- Extended battery life for portable applications
- Reduced thermal management requirements
- Lower overall system power costs
High-Speed Performance
The XC2C384-10PQ208C delivers impressive timing specifications that meet the demands of modern high-speed digital systems. The -10 speed grade ensures reliable performance for timing-critical applications.
XC2C384-10PQ208C Technical Specifications
| Parameter |
Specification |
| Part Number |
XC2C384-10PQ208C |
| Manufacturer |
AMD / Xilinx |
| Device Family |
CoolRunner-II CPLD |
| Number of Macrocells |
384 |
| Equivalent Gates |
9,000 |
| Maximum I/O Pins |
173 |
| I/O Banks |
4 |
| Package Type |
208-PQFP (28mm × 28mm) |
| Mounting Type |
Surface Mount |
| Speed Grade |
-10 |
XC2C384-10PQ208C Electrical Characteristics
| Parameter |
Value |
| Core Supply Voltage (VCCINT) |
1.7V to 1.9V |
| I/O Supply Voltage (VCCIO) |
1.5V to 3.3V |
| Maximum Propagation Delay (TPD) |
7.1 ns |
| Setup Time (TSU) |
2.9 ns |
| Clock-to-Output Delay (TCO) |
5.8 ns |
| Maximum System Frequency |
217 MHz |
| Maximum Delay Time |
9.2 ns |
XC2C384-10PQ208C Operating Conditions
| Parameter |
Specification |
| Operating Temperature |
0°C to +70°C (Commercial) |
| Technology Process |
0.18μm CMOS |
| Moisture Sensitivity Level (MSL) |
3 (168 hours) |
| Programmability |
In-System Programmable (ISP) |
| RoHS Compliance |
Check with distributor |
XC2C384-10PQ208C Supported I/O Standards
The XC2C384-10PQ208C offers versatile voltage interfacing capabilities, supporting multiple I/O standards for seamless integration with various system components:
| I/O Standard |
Supported |
| LVTTL |
✓ |
| LVCMOS33 |
✓ |
| LVCMOS25 |
✓ |
| LVCMOS18 |
✓ |
| LVCMOS15 |
✓ |
| SSTL2_1 |
✓ |
| SSTL3_1 |
✓ |
| HSTL_1 |
✓ |
Advanced CoolRunner-II CPLD Features
DualEDGE Flip-Flop Technology
The XC2C384-10PQ208C incorporates DualEDGE flip-flop technology, enabling logic operations on both rising and falling clock edges. This innovative feature effectively doubles the performance of clock-intensive designs without increasing clock frequency or power consumption.
DataGATE Technology for Power Management
DataGATE technology allows selective disabling of unused input pins, further reducing dynamic power consumption. This feature is particularly valuable for battery-powered devices where every milliwatt counts.
Quadruple Data Security
The XC2C384-10PQ208C features quadruple data security protection to safeguard your intellectual property. This multi-layer security prevents unauthorized read-back of programmed designs, ensuring your proprietary logic remains protected.
IEEE 1532/1149.1 JTAG Support
Full IEEE 1532 and IEEE 1149.1 boundary-scan (JTAG) compliance enables:
- In-system programming capabilities
- Efficient board-level testing
- Design debugging and verification
- Chain programming for multi-device systems
XC2C384-10PQ208C Applications
The versatile XC2C384-10PQ208C CPLD is suitable for a wide range of applications:
- Telecommunications Equipment: Protocol bridging, interface conversion, and signal routing
- Industrial Automation: PLC interfaces, motor control logic, and sensor data processing
- Consumer Electronics: Power management, LED control, and user interface logic
- Portable Devices: Battery-powered applications requiring minimal standby current
- Networking Equipment: Packet processing, address decoding, and bus arbitration
- Medical Devices: Signal conditioning and control logic for diagnostic equipment
- Automotive Systems: Dashboard controllers and communication interfaces
- FPGA Configuration: Boot ROM and configuration management for Xilinx FPGA systems
XC2C384-10PQ208C Package Information
208-PQFP Package Specifications
| Parameter |
Dimension |
| Package Format |
Plastic Quad Flat Pack (PQFP) |
| Package Size |
28mm × 28mm |
| Pin Count |
208 pins |
| Lead Pitch |
0.5mm |
| Terminal Type |
Gull Wing |
| Shipping Format |
Tray |
Design Resources and Development Tools
The XC2C384-10PQ208C is fully supported by AMD Xilinx’s comprehensive development ecosystem:
Software Support
- Xilinx ISE Design Suite: Complete CPLD design environment with schematic capture, HDL synthesis, and device programming
- Xilinx Vivado: Advanced design tools for simulation and verification
- WebPACK: Free downloadable software for CoolRunner-II development
Design Documentation
- DS090: CoolRunner-II CPLD Family Data Sheet
- DS095: XC2C384 Device-Specific Documentation
- Application notes for voltage translation, power management, and FPGA configuration
Why Choose the XC2C384-10PQ208C CPLD?
Advantages Over Competing CPLDs
- Superior Power Efficiency: True CMOS architecture eliminates residual sense amplifier current common in other CPLD families
- Flexible I/O Banking: Four independent I/O banks support mixed-voltage designs without external level shifters
- Instant-On Operation: Non-volatile flash-based storage means the device is operational immediately after power-up
- High Reliability: Proven 0.18μm technology with excellent temperature stability
- Cost-Effective Solution: Competitive pricing with reduced system costs through integrated level shifting
XC2C384-10PQ208C Ordering Information
| Order Code |
Description |
| XC2C384-10PQ208C |
CoolRunner-II CPLD, 384 Macrocells, -10 Speed, 208-PQFP, Commercial Temp (0°C to +70°C) |
| XC2C384-10PQ208I |
Industrial Temperature Version (-40°C to +85°C) |
Related CoolRunner-II CPLD Devices
| Part Number |
Macrocells |
Max I/O |
Package Options |
| XC2C32A |
32 |
33 |
VQ44, QF32, CP56 |
| XC2C64A |
64 |
64 |
VQ44, VQ100, CP56 |
| XC2C128 |
128 |
100 |
TQ144, VQ100, FT256 |
| XC2C256 |
256 |
184 |
TQ144, PQ208, FT256 |
| XC2C384 |
384 |
240 |
TQ144, PQ208, FT256, FG324 |
| XC2C512 |
512 |
270 |
PQ208, FT256, FG324 |
Conclusion
The XC2C384-10PQ208C represents an excellent choice for engineers seeking a high-performance, low-power CPLD solution. With its robust feature set including 384 macrocells, 173 I/O pins, advanced power management technologies, and comprehensive I/O standard support, this CoolRunner-II device delivers exceptional value for embedded system designs. Whether you’re developing telecommunications equipment, industrial controls, or portable consumer electronics, the XC2C384-10PQ208C provides the performance, flexibility, and power efficiency your application demands.
