Contact Sales & After-Sales Service

Contact & Quotation

  • Inquire: Call 0086-755-23203480, or reach out via the form below/your sales contact to discuss our design, manufacturing, and assembly capabilities.
  • Quote: Email your PCB files to Sales@pcbsync.com (Preferred for large files) or submit online. We will contact you promptly. Please ensure your email is correct.
Drag & Drop Files, Choose Files to Upload You can upload up to 3 files.

Notes:
For PCB fabrication, we require PCB design file in Gerber RS-274X format (most preferred), *.PCB/DDB (Protel, inform your program version) format or *.BRD (Eagle) format. For PCB assembly, we require PCB design file in above mentioned format, drilling file and BOM. Click to download BOM template To avoid file missing, please include all files into one folder and compress it into .zip or .rar format.

<a href="https://pcbsync.com/pcb-manufacturing/">PCB Manufacturing</a> Equipment | High-End PCB Fabrication — PCBSync
Capabilities  ›  PCB Equipment
Capabilities · PCB Equipment

The equipment behind
high-end PCBs.

A complete, in-house PCB manufacturing line — laser direct imaging, laser drilling, VCP plating, X-ray registration, AOI and flying-probe test — continually upgraded since 2005 to build the most demanding boards.

Get a PCB quote See the line
In-house since 2005LDI · laser drill · VCPHDI & fine-line100% E-test + AOI
PCBSync PCB manufacturing equipment line
PCBSync PCB Manufacturing Line — Shenzhen
Since 2005
In-house PCB line
12/48/72 h
2 / 4 / 6-layer quick-turn
LDI
Fine-line imaging
Laser drill
HDI microvia
VCP
Uniform plating
100%
E-test + AOI
Why equipment matters

The quality of a board starts with the tools

Fine lines, tiny microvias, tight impedance and high layer counts are only as good as the machines that make them. PCBSync has set a high-end benchmark in PCB manufacturing equipment — sourced locally and internationally, and continually upgraded — so demanding designs are built right the first time, at speed.

Finer features

Laser direct imaging (LDI) holds tight registration and fine lines and spaces down to 3 mil — without the drift of film-based exposure.

HDI & reliability

Laser drilling, sequential lamination and VCP plating produce stacked microvias and uniform copper for any-layer HDI and high-reliability boards.

Verified in-line

X-ray registration, AOI and 100% electrical test are built into the flow — every board is measured, not just made.

Inside the factory

Our PCB manufacturing equipment

A look at the machines on our quick-turn and volume PCB lines — from imaging and drilling to plating, finishing and test.

Laser direct imaging equipment
Laser Direct Imaging (LDI)
CNC drilling machine
CNC Drilling Machine
Laser drilling machine for microvias
Laser Drilling (Microvia)
Vacuum lamination press
Vacuum Lamination Press
VCP electroplating line
VCP Electroplating Line
Dry film lamination
Dry Film Lamination
Automated optical inspection
Automated Optical Inspection
Solder mask exposure
Solder Mask Exposure
Surface finish ENIG line
Surface Finish (ENIG) Line
Legend inkjet printing
Legend / Inkjet Printing
CNC routing and V-cut
CNC Routing / V-Cut
Flying probe electrical test
Flying Probe / E-Test

Photographs of equipment in the PCBSync factory. Configurations may vary by line and over time.

The full line

Every stage, in-house

A complete fabrication line under one roof means tighter control, faster turns and fewer hand-offs — from raw laminate to a tested, finished board.

Imaging & drilling

Defining the pattern and the holes — where precision begins.

Laser Direct Imaging (LDI)

Direct-write imaging for fine lines and spaces with excellent layer-to-layer registration — no phototool drift.

Fine-line capability

CNC & Laser Drilling

Mechanical drilling to 0.15 mm and laser microvias to 0.1 mm for blind, buried and stacked-via constructions.

HDI capability

X-Ray Registration

X-ray target / registration keeps inner layers aligned on high-layer-count and HDI boards.

Multilayer PCB

Lamination & plating

Building the stack and the copper — strength and conductivity.

Vacuum Lamination Press

Multilayer and sequential lamination with controlled heat and pressure for void-free, registered stacks.

Rigid-flex capability

VCP Electroplating

Vertical continuous plating for uniform copper distribution, reliable hole-wall plating and heavy copper.

Heavy copper

Via Fill & Plating

Copper-filled and capped vias (VIPPO) and plated-shut microvias for fine-pitch BGA fan-out.

Via-in-pad

Finishing & test

Solder mask, finish, profiling and 100% verification.

Solder Mask & Finish

LPI solder mask plus ENIG, OSP, immersion silver / tin, HASL and hard gold surface-finish lines.

Surface finishes

Routing & V-Cut

CNC routing, V-scoring and beveling for precise profiles, slots and panelization.

Plated slots

AOI & Flying-Probe Test

Automated optical inspection and 100% electrical test (flying probe / universal grid) before shipment.

PCB E-test
Built for high-end PCBs

This equipment unlocks the boards others can't build.

Advanced machines translate directly into advanced capability. Here's what our line lets you specify — each backed by a dedicated capability page.

3 mil

Fine line & space

Tight traces via LDI imaging.

Rigid capability
Any-layer

HDI & microvia

Laser drill + sequential lam.

HDI capability
±7%

Controlled impedance

TDR-verified stackups.

Impedance control
12 oz

Heavy copper

High-current VCP plating.

Heavy copper
56

Layer count

X-ray-registered lamination.

Multilayer PCB
Blind / buried

Advanced vias

Registered sequential build.

Blind vias
Back-drill

Stub removal

High-speed signal integrity.

Back-drilling
RF

High-frequency

Rogers / PTFE materials.

High-frequency PCB

Have a high-end board to build?

Send your Gerbers and stackup — our engineers confirm manufacturability on our line and reply with a quote, usually within 24 hours, plus a free DFM review.

Get a PCB quote Manufacturing quote
Quality & compliance

A line built to recognized standards

Advanced equipment is matched by a documented quality system, so every board is built and verified to the standards your program requires.

ISO 9001Quality management
UL · 94V-0Listed
IPC-A-600Class 2 & 3
RoHS / REACHEU compliant
IATF 16949Automotive-capable
ISO 13485 medical-capable AS9100 aerospace-capable 100% E-test & AOI Full traceability
Get a quote

PCB quote in 24 hours

Tell us about your board and our engineers reply with pricing, lead time and a free design-for-manufacturing review — no obligation, NDA on request.

  • Gerbers (RS-274X) + drill and stackup.
  • Layers, material & finish, quantity and any special process.
  • HDI / impedance / heavy-copper needs, if any.

PCB quote request

Reply within 24 hours · free DFM review
or
Upload Gerber files →
Submitting opens your email app with the details prefilled. Files are attached on the upload page.
Explore

Related capability & quality pages

All CapabilitiesFull factory spec Rigid PCB CapabilitiesUp to 56 layers HDI PCB CapabilitiesMicrovia & build-up PCB LaboratoryPhysics & chemistry testing Quality ControlOur QA system Get a QuotePCB quote in 24h
Answers

PCB equipment — FAQ

Our in-house line covers laser direct imaging (LDI), CNC and laser drilling, vacuum lamination press, X-ray inner-layer registration, VCP electroplating, automated solder mask and surface-finish lines, CNC routing / V-cut, AOI and flying-probe electrical test — acquired and continually upgraded since 2005.

Fine lines and spaces down to 3 mil, HDI with laser microvias and any-layer build-up, controlled impedance to ±7%, heavy copper to 12 oz, blind and buried vias, via-in-pad and back-drilling, and high layer counts up to 56 layers.

Our quick-turn line ships 2-layer boards in 12 hours, 4-layer in 48 hours and 6-layer in 72 hours, with prototype-to-volume capacity.

Quality is built in with X-ray registration, automated optical inspection (AOI), 100% electrical test (flying probe / universal grid) and impedance / TDR verification, under an ISO 9001 system with UL and IPC compliance. See our quality control and PCB laboratory.

Send your Gerbers and stackup through the inquiry form above or upload them on our contact page. We reply with a quote, usually within 24 hours, plus a free DFM review.

High-end boards, built right.

Partner with a manufacturer whose equipment is built for the hardest PCBs — fine-line, HDI, controlled-impedance and beyond. Send your files for a quote with a free DFM review, usually within 24 hours.

Get a PCB quote All capabilities

Contact Sales & After-Sales Service

Contact & Quotation

  • Inquire: Call 0086-755-23203480, or reach out via the form below/your sales contact to discuss our design, manufacturing, and assembly capabilities.

  • Quote: Email your PCB files to Sales@pcbsync.com (Preferred for large files) or submit online. We will contact you promptly. Please ensure your email is correct.

Drag & Drop Files, Choose Files to Upload You can upload up to 3 files.

Notes:
For PCB fabrication, we require PCB design file in Gerber RS-274X format (most preferred), *.PCB/DDB (Protel, inform your program version) format or *.BRD (Eagle) format. For PCB assembly, we require PCB design file in above mentioned format, drilling file and BOM. Click to download BOM template To avoid file missing, please include all files into one folder and compress it into .zip or .rar format.