Contact Sales & After-Sales Service

Contact & Quotation

  • Inquire: Call 0086-755-23203480, or reach out via the form below/your sales contact to discuss our design, manufacturing, and assembly capabilities.
  • Quote: Email your PCB files to Sales@pcbsync.com (Preferred for large files) or submit online. We will contact you promptly. Please ensure your email is correct.
Drag & Drop Files, Choose Files to Upload You can upload up to 3 files.

Notes:
For PCB fabrication, we require PCB design file in Gerber RS-274X format (most preferred), *.PCB/DDB (Protel, inform your program version) format or *.BRD (Eagle) format. For PCB assembly, we require PCB design file in above mentioned format, drilling file and BOM. Click to download BOM template To avoid file missing, please include all files into one folder and compress it into .zip or .rar format.

PCB Laboratory | First-Level PCB Testing — Physics & Chemistry Labs — PCBSync
Capabilities  ›  PCB Laboratory
Capabilities · PCB Laboratory

A first-level PCB laboratory,
so quality is proven — not promised.

High-quality PCBs must be tested by a first-level laboratory. PCBSync runs dedicated physics and chemistry labs with 20+ instruments, so every board is verified to IPC-A-610 & J-STD-001 before it ships.

Request lab testing See the equipment
20+ instrumentsPhysics & chemistry labsIPC-A-610 · J-STD-001Calibrated & SPC-monitored
PCBSync PCB physics testing laboratory
PCBSync PCB Testing Laboratory — Shenzhen
100%
Electrical test
20+
Test instruments
Physics +
chemistry
Dedicated labs
IPC-A-610
& J-STD-001
GR&R
Calibrated to standards
SPC
Data-monitored quality
Why it matters

For high-reliability boards, testing isn't optional

A board can look perfect and still fail in the field — a thin via wall, a marginal lamination, a contaminated surface. A first-level laboratory exists to find those failures here, on the bench, instead of in your product. It is the difference between a supplier who hopes a board is good and one who can prove it.

Catch defects before you do

Microsection, X-ray registration and thermal stress reveal hidden plating, via and lamination issues that no visual check can — long before they reach assembly or the field.

Proven, not assumed

Electrical, physical and chemical analysis means each shipment is backed by measured data — essential for medical, automotive, aerospace and other demanding programs.

A partner for your R&D

We open our lab to your development projects — verifying designs, running reliability checks and giving engineering feedback so you de-risk before volume.

Inside the lab

Our physics & chemistry laboratories

Dedicated, climate-controlled lab spaces where our engineers qualify every board across physical, chemical and electrical testing.

Physics Laboratory
Physics Laboratory
Physics Laboratory — Room 2
Physics Laboratory — Room 2
Physics Laboratory — Room 3
Physics Laboratory — Room 3
Physics Laboratory — Room 4
Physics Laboratory — Room 4
Chemistry Laboratory
Chemistry Laboratory
Chemistry Laboratory — Room 2
Chemistry Laboratory — Room 2
Laboratory equipment

The instruments behind every verified board

More than twenty calibrated instruments, grouped by what they verify — from layer registration and plating thickness to bath chemistry, impedance and reliability.

Dimensional & structural analysis

Layer registration, thickness, copper and adhesion verified inside the board.

X-Ray Inner-Layer Registration Tester
X-Ray Inner-Layer Registration Tester
Press Long-Arm Board Thickness Tester
Press Long-Arm Board Thickness Tester
CMI900 Plating Thickness Tester
CMI900 Plating Thickness Tester
Copper Thickness Survey Meter
Copper Thickness Survey Meter
V-Cut Thickness Measuring Instrument
V-Cut Thickness Measuring Instrument
2D Measuring Detector
2D Measuring Detector
Copper Adhesion Tester
Copper Adhesion Tester
Densitometer
Densitometer

Chemical analysis

Bath chemistry, contamination and compliance from the chemistry lab.

CVS Machine — Brightener and Leveller Analysis
CVS Machine — Brightener & Leveller Analysis
UV Spectrophotometer
UV Spectrophotometer
Ionic Contamination Tester
Ionic Contamination Tester
RoHS Tester
RoHS Tester
Digital pH Meter
Digital pH Meter

Electrical testing

Impedance and insulation verification.

Impedance Tester
Impedance Tester
Insulation Resistance Tester
Insulation Resistance Tester

Thermal & material reliability

Stress, resin behaviour and thermal response of materials.

Temp and Humidity Chamber
Temp & Humidity Chamber
Resin Flow Pressure Apparatus
Resin Flow Pressure Apparatus
Gel Time Tester
Gel Time Tester
Box Resistor Stove
Box Resistor Stove
Tin Stove
Tin Stove

Final inspection

Last-line verification before shipment.

Finished Product Inspection
Finished Product Inspection

Photographs of equipment in the PCBSync laboratory. Configurations may vary by line and over time.

One laboratory, three disciplines

Electrical, physics & chemistry — under one roof

High-quality boards are verified from three angles. We run all three in-house, so testing is fast, traceable and never outsourced.

Electrical lab

Every board, tested electrically

100% verification of connectivity and isolation, plus impedance and dielectric testing.

Physics lab

Structure & reliability, proven

Cross-sectional, dimensional and stress analysis that confirms what's inside the board.

  • X-ray registration & plating thickness
  • Board / V-cut thickness & 2D metrology
  • Copper adhesion & thermal stress
Chemistry lab

Clean, solderable surfaces

Chemical and surface analysis that protects long-term solderability and reliability.

  • CVS bath & UV spectrophotometer
  • Ionic contamination & pH
  • RoHS compliance screening

Need a board verified to spec?

Send your Gerbers, stackup and reliability requirements — our lab engineers propose a test plan and reply with a quote, usually within 24 hours. NDA on request.

Request lab testing Our quality system
Standards & rigor

Tested to documented standards

Testing only builds trust when it's consistent and traceable. Our protocols follow recognized standards, with calibrated equipment and data-driven control.

IPC-A-610Acceptability of assemblies
J-STD-001Soldering requirements
Calibration & GR&RTraceable standards
SPCStatistical process control
Documented sampling & pass/fail criteria First-article inspection Data retention & traceability Anti-static, climate-controlled lab
Request lab testing

Get a test plan & quote in 24 hours

Tell us what you need verified and our lab engineers reply with a recommended test plan, pricing and lead time — no obligation, NDA on request.

  • Gerbers + stackup and the board's intended application.
  • Tests required — E-test, microsection, plating thickness, impedance, ionic, thermal…
  • Standard / class — e.g. IPC-A-610 Class 2 or 3, and any customer spec.

PCB lab / testing inquiry

Reply within 24 hours · NDA on request
or
Upload files on our contact page →
Submitting opens your email app with the details prefilled. Files are attached on the upload page.
Explore

Related testing & quality pages

Quality ControlOur QA system PCB E-Test100% electrical test X-Ray InspectionHidden-joint analysis In-Circuit TestBed-of-nails ICT Hipot TestDielectric withstand All CapabilitiesFull factory spec
Answers

PCB Laboratory — FAQ

High-reliability PCBs must be verified, not assumed. An in-house first-level laboratory lets us test boards electrically and validate plating, lamination, solderability and reliability with physics and chemistry analysis — catching issues before they ever reach your product.

Our physics and chemistry labs hold 20+ instruments, including an X-ray inner-layer registration tester, board-thickness and CMI900 plating-thickness testers, copper thickness and adhesion testers, a 2D measuring detector, impedance and insulation-resistance testers, CVS bath analysis, UV spectrophotometer, ionic-contamination and RoHS testers, a temperature & humidity chamber, and resin-flow and gel-time testers.

Inspection and acceptance follow IPC-A-610 and J-STD-001, with documented sampling, pass/fail criteria and data retention. Measurement equipment is calibrated to traceable standards with gauge repeatability and reproducibility (GR&R) studies, and quality is monitored with statistical process control (SPC).

Yes. We extend laboratory access for R&D projects to verify PCB designs, and our engineers provide testing support — functional, environmental and reliability assessment — to identify potential issues before product deployment.

Send your Gerbers, stackup and test requirements through the inquiry form above or upload them on our contact page. We reply with a quote and recommended test plan, usually within 24 hours.

Quality you can verify.

Partner with a manufacturer whose laboratory proves every board — from electrical test to full physical and chemical analysis. Send your files for a test plan and quote, usually within 24 hours.

Request lab testing Our quality system

Contact Sales & After-Sales Service

Contact & Quotation

  • Inquire: Call 0086-755-23203480, or reach out via the form below/your sales contact to discuss our design, manufacturing, and assembly capabilities.

  • Quote: Email your PCB files to Sales@pcbsync.com (Preferred for large files) or submit online. We will contact you promptly. Please ensure your email is correct.

Drag & Drop Files, Choose Files to Upload You can upload up to 3 files.

Notes:
For PCB fabrication, we require PCB design file in Gerber RS-274X format (most preferred), *.PCB/DDB (Protel, inform your program version) format or *.BRD (Eagle) format. For PCB assembly, we require PCB design file in above mentioned format, drilling file and BOM. Click to download BOM template To avoid file missing, please include all files into one folder and compress it into .zip or .rar format.