The XC2C32A-6PCG44C is a high-performance Complex Programmable Logic Device (CPLD) from the Xilinx CoolRunner-II family. This ultra-low-power CPLD delivers exceptional performance with 32 macrocells and 750 gates, making it an ideal choice for portable electronics, industrial applications, and embedded systems that demand minimal power consumption.
Whether you’re designing consumer electronics or industrial control systems, the XC2C32A-6PCG44C offers reliable in-system programmability and versatile I/O compatibility. Explore more programmable logic solutions at Xilinx FPGA for your next project.
XC2C32A-6PCG44C Technical Specifications
Understanding the complete specifications of the XC2C32A-6PCG44C helps engineers select the right component for their applications. The table below provides detailed technical attributes.
General Parameters
| Specification |
Value |
| Manufacturer |
Xilinx (AMD) |
| Product Family |
CoolRunner-II CPLD |
| Part Number |
XC2C32A-6PCG44C |
| Package Type |
PLCC-44 (Plastic Leaded Chip Carrier) |
| Pin Count |
44 Pins |
| RoHS Compliant |
Yes |
| Operating Temperature |
0°C to +70°C (Commercial) |
Performance Specifications
| Parameter |
Specification |
| Number of Macrocells |
32 |
| Gate Count |
750 Gates |
| Maximum Frequency |
200 MHz |
| Process Technology |
0.18μm CMOS |
| Core Voltage |
1.8V |
| I/O Standards Supported |
3.3V, 2.5V, 1.8V, 1.5V LVCMOS/LVTTL |
XC2C32A-6PCG44C Key Features and Benefits
The CoolRunner-II XC2C32A-6PCG44C integrates several advanced features that make it stand out in the CPLD market.
Ultra-Low Power Architecture
The XC2C32A-6PCG44C utilizes Xilinx’s proprietary Fast Zero Power (FZP) technology. This innovative architecture ensures:
- Near-zero standby power consumption
- Dynamic power management capabilities
- Extended battery life for portable applications
- Reduced thermal dissipation requirements
Advanced Interconnect Matrix (AIM)
This CPLD device incorporates eight Function Blocks connected through a low-power Advanced Interconnect Matrix. Key advantages include:
- 40 true and complement inputs per Function Block
- 40 × 56 P-term PLA architecture
- 16 macrocells per Function Block with configurable modes
- Flexible combinational and registered operation
Flexible Clocking Options
| Clock Feature |
Description |
| Global Clocks |
3 global clock signals available |
| DualEDGE Technology |
Double data rate on rising and falling edges |
| Clock Divider |
8 different division selections on GCK2 |
| Local Clocks |
Product-term based per-macrocell clocking |
| Clock Enable |
Synchronous clock-enable support |
I/O Banking and Voltage Compatibility
The XC2C32A-6PCG44C features two I/O banks that enable seamless interfacing with multiple voltage standards:
| I/O Bank |
Supported Voltages |
| Bank 1 |
3.3V, 2.5V, 1.8V, 1.5V |
| Bank 2 |
3.3V, 2.5V, 1.8V, 1.5V |
XC2C32A-6PCG44C Pin Configuration Options
Engineers benefit from multiple pin configuration capabilities when designing with this CPLD.
Output Pin Features
| Feature |
Benefit |
| Slew Rate Control |
Reduces EMI and signal noise |
| Bus Hold |
Maintains last valid logic state |
| Programmable Pull-up |
Eliminates external resistors |
| Open Drain |
Enables wired-OR connections |
| Programmable Grounds |
Enhanced signal integrity |
Input Pin Features
| Feature |
Description |
| Schmitt-Trigger Inputs |
Available per input pin for noise immunity |
| Direct Input Registers |
Store signals directly from input pins |
| JTAG Interface |
IEEE 1149.1/1532 boundary-scan support |
XC2C32A-6PCG44C Applications
The versatility of the XC2C32A-6PCG44C makes it suitable for numerous industries and applications.
Industrial Applications
- Industrial automation controllers
- Motor control interfaces
- Sensor data acquisition systems
- PLC (Programmable Logic Controller) interfaces
Consumer Electronics
- Portable media devices
- Battery-powered equipment
- Smart home controllers
- Wearable technology
Communication Systems
- Protocol conversion bridges
- Interface adapters
- Glue logic for system integration
- Signal routing and switching
Automotive and Transportation
- Dashboard display controllers
- Infotainment system interfaces
- Body electronics modules
- Sensor integration units
XC2C32A-6PCG44C Programming and Development
In-System Programming (ISP)
The XC2C32A-6PCG44C supports convenient in-system programming with the following specifications:
| ISP Parameter |
Specification |
| Programming Interface |
JTAG (IEEE 1149.1/1532) |
| Endurance |
20,000 Program/Erase Cycles |
| Programming Voltage |
1.8V Core |
| Configuration Storage |
Non-volatile Flash |
Development Tools Compatibility
Designers can leverage Xilinx ISE Design Suite for XC2C32A-6PCG44C development, which provides:
- Schematic capture and HDL entry
- Logic synthesis and optimization
- Timing analysis and simulation
- JTAG programming interface
XC2C32A-6PCG44C Ordering Information
Part Number Breakdown
| Code Segment |
Meaning |
| XC2C |
CoolRunner-II Family |
| 32A |
32 Macrocells, “A” Revision |
| 6 |
Speed Grade (-6) |
| PCG |
PLCC Package, Lead-Free |
| 44 |
44-Pin Package |
| C |
Commercial Temperature Range |
Related Part Numbers
| Part Number |
Temperature Range |
Package |
| XC2C32A-6PCG44C |
Commercial (0°C to +70°C) |
PLCC-44 Lead-Free |
| XC2C32A-6PCG44I |
Industrial (-40°C to +85°C) |
PLCC-44 Lead-Free |
| XC2C32A-6PC44C |
Commercial |
PLCC-44 |
| XC2C32A-6QFG32C |
Commercial |
QFN-32 Lead-Free |
Why Choose XC2C32A-6PCG44C for Your Design?
The XC2C32A-6PCG44C offers several compelling advantages for design engineers:
- Power Efficiency: Near-zero standby current extends battery life significantly
- Fast Performance: 200 MHz operation enables high-speed applications
- Flexibility: Multiple I/O standards support simplifies system integration
- Reliability: 20,000 program/erase cycles ensure long-term dependability
- Cost-Effective: Optimized 32-macrocell architecture reduces overall BOM cost
Conclusion
The XC2C32A-6PCG44C CoolRunner-II CPLD from Xilinx delivers an exceptional combination of ultra-low power consumption, high-speed performance, and flexible I/O capabilities. Its 32 macrocells, 200 MHz operation, and comprehensive feature set make it an excellent choice for applications ranging from portable consumer electronics to industrial control systems.
With robust in-system programming support and compatibility with industry-standard development tools, the XC2C32A-6PCG44C streamlines the design process while ensuring reliable, long-term operation. This CPLD remains a trusted solution for engineers seeking power-efficient programmable logic.
