The XC2S200-6FGG602C is a powerful Field Programmable Gate Array (FPGA) from AMD’s acclaimed Spartan-II family, engineered to deliver exceptional performance and reliability for demanding digital design applications. This versatile programmable logic device combines 200,000 system gates with advanced on-chip features, making it an ideal solution for engineers seeking cost-effective ASIC replacement technology with unlimited reprogrammability.
Whether you’re developing communication systems, industrial automation equipment, or medical devices, the XC2S200-6FGG602C offers the perfect balance of logic capacity, memory resources, and I/O flexibility. Browse our complete selection of Xilinx FPGA products to find the right programmable logic solution for your project.
XC2S200-6FGG602C Key Features and Benefits
Advanced FPGA Architecture
The XC2S200-6FGG602C utilizes second-generation ASIC replacement technology based on the proven Virtex FPGA architecture. This device features a streamlined design optimized for high-volume applications where cost-effectiveness and reliability are paramount.
High Logic Density and Gate Count
With 200,000 system gates and 5,292 logic cells, the XC2S200-6FGG602C provides substantial logic capacity for implementing complex digital designs. The 28 x 42 CLB (Configurable Logic Block) array offers flexible routing resources and efficient logic utilization.
SelectRAM Hierarchical Memory System
The XC2S200-6FGG602C incorporates AMD’s SelectRAM technology, providing:
- 75,264 bits of distributed RAM (16 bits per LUT)
- 56 Kbits of dedicated Block RAM in configurable 4K-bit blocks
- Dual-port RAM capability for simultaneous read/write operations
- Flexible memory configuration for various application requirements
XC2S200-6FGG602C Technical Specifications
| Parameter |
Specification |
| Manufacturer |
AMD (formerly Xilinx) |
| FPGA Family |
Spartan-II |
| System Gates |
200,000 |
| Logic Cells |
5,292 |
| CLB Array |
28 x 42 |
| Total CLBs |
1,176 |
| Maximum User I/O |
284 |
| Distributed RAM |
75,264 bits |
| Block RAM |
56 Kbits |
| Delay-Locked Loops (DLLs) |
4 |
| Maximum Clock Frequency |
263 MHz |
| Process Technology |
0.18 µm CMOS |
| Core Voltage |
2.5V |
| I/O Voltage |
3.3V |
| Package Type |
FGG602 Fine-Pitch Ball Grid Array |
| Pin Count |
602 |
| Speed Grade |
-6 (Highest Performance) |
| Temperature Range |
Commercial (0°C to +85°C) |
| RoHS Compliance |
Pb-free (G designation) |
XC2S200-6FGG602C Package Information
FGG602 Ball Grid Array Package
The XC2S200-6FGG602C comes in a 602-ball Fine-Pitch Ball Grid Array (FBGA) package, offering maximum I/O connectivity for complex system designs. The “G” designation indicates lead-free (Pb-free) packaging compliant with RoHS environmental regulations.
Pin Configuration and I/O Standards
The XC2S200-6FGG602C supports multiple I/O standards including:
- LVTTL (Low Voltage TTL)
- LVCMOS (Low Voltage CMOS)
- PCI-compliant interfaces
- SSTL and GTL standards
- Differential signaling support
XC2S200-6FGG602C Speed Grade Explained
-6 Speed Grade Performance
The -6 speed grade designation indicates the highest performance tier available for Spartan-II devices. This grade is exclusively offered in the commercial temperature range and delivers:
- Fastest propagation delays
- Highest clock frequencies up to 263 MHz
- Optimized timing for high-speed digital designs
- Ideal for performance-critical applications
XC2S200-6FGG602C Clock Management
Four Delay-Locked Loops (DLLs)
The XC2S200-6FGG602C features four dedicated Delay-Locked Loops positioned at each corner of the die, providing:
- Clock deskewing and distribution
- Zero-delay clock buffering
- Board-level clock synchronization
- Frequency synthesis capabilities
- Elimination of clock insertion delays
XC2S200-6FGG602C Applications
Industrial Automation and Control
The XC2S200-6FGG602C excels in industrial applications requiring:
- Motor control systems
- Process automation
- PLC (Programmable Logic Controller) replacement
- Machine vision processing
- Sensor interfacing
Telecommunications and Networking
Ideal for communication equipment including:
- Network routers and switches
- Protocol converters
- Data transmission systems
- Baseband processing
- Interface bridging
Medical and Healthcare Electronics
Suitable for medical device applications such as:
- Diagnostic imaging systems
- Patient monitoring equipment
- Laboratory instruments
- Medical signal processing
Consumer Electronics
Perfect for consumer products requiring:
- Video processing
- Audio systems
- Display controllers
- Gaming peripherals
XC2S200-6FGG602C Design Resources
Development Tools and Software
The XC2S200-6FGG602C is supported by AMD’s ISE Design Suite, offering:
- Schematic and HDL design entry
- Synthesis and implementation tools
- Timing analysis and simulation
- In-system debugging capabilities
- JTAG programming interface
Configuration Options
The XC2S200-6FGG602C supports multiple configuration modes:
- Master Serial mode
- Slave Serial mode
- Master Parallel mode
- Slave Parallel mode
- JTAG Boundary Scan programming
XC2S200-6FGG602C vs ASIC Solutions
Cost-Effective Alternative to Mask-Programmed ASICs
The XC2S200-6FGG602C offers significant advantages over traditional ASIC solutions:
| Factor |
XC2S200-6FGG602C FPGA |
Mask-Programmed ASIC |
| Initial Cost |
Low |
Very High (NRE costs) |
| Development Time |
Weeks |
Months to Years |
| Design Risk |
Minimal |
Significant |
| Field Upgrades |
Yes (In-system reprogrammable) |
Impossible |
| Prototype Cost |
Minimal |
Extremely High |
| Time-to-Market |
Fast |
Slow |
XC2S200-6FGG602C Ordering Information
Part Number Breakdown
XC2S200-6FGG602C decodes as follows:
- XC2S200: Spartan-II 200K gate device
- -6: Speed grade 6 (highest performance)
- FG: Fine-pitch Ball Grid Array
- G: Pb-free (RoHS compliant)
- 602: 602-ball package
- C: Commercial temperature range (0°C to +85°C)
Frequently Asked Questions About XC2S200-6FGG602C
What is the XC2S200-6FGG602C used for?
The XC2S200-6FGG602C is used for implementing custom digital logic designs in applications such as industrial automation, telecommunications, medical devices, and consumer electronics. Its programmable nature allows engineers to create tailored solutions without the cost and time associated with custom ASIC development.
Is the XC2S200-6FGG602C still available?
Yes, the XC2S200-6FGG602C remains available through authorized AMD distributors and electronic component suppliers. While it’s a mature product, it continues to be used in maintenance, repair, and legacy system applications.
What voltage does the XC2S200-6FGG602C require?
The XC2S200-6FGG602C requires a 2.5V core supply voltage (VCCINT) and 3.3V I/O supply voltage (VCCO) for standard operation.
Can the XC2S200-6FGG602C be reprogrammed in-circuit?
Yes, the XC2S200-6FGG602C supports in-system programmability via JTAG interface, allowing field upgrades without hardware replacement.
What development tools support the XC2S200-6FGG602C?
AMD’s ISE Design Suite provides complete support for the XC2S200-6FGG602C, including design entry, synthesis, implementation, simulation, and programming tools.
XC2S200-6FGG602C Summary
The XC2S200-6FGG602C represents an excellent choice for engineers requiring a reliable, high-performance FPGA solution with proven architecture and extensive design resources. With 200,000 system gates, 5,292 logic cells, and comprehensive memory resources, this Spartan-II device delivers outstanding value for digital design applications across multiple industries.
For more information about programmable logic solutions and related components, explore our complete range of FPGA products and technical resources.
